Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
HomePublicationsRegisterLog in

Share | 

 VZ 800 Clutch Cable

View previous topic View next topic Go down 
Steen G

PostSubject: VZ 800 Clutch Cable   Wed Jan 15, 2014 12:23 pm

I've changed the handlebar on my bike and that 90 degree bend on the clutch cable is a real pain in the ****. The cable won't sit as I want it to.

Question is, does any one know if there is a cable from another bike, without that 90 degree bend, that will fit my bike?
Back to top Go down
Mr Intruder Founder ... & ... Senior Administrator

PostSubject: Re: VZ 800 Clutch Cable   Wed Jan 15, 2014 1:06 pm

Not sure how different your bike is to mine in this area but I would have thought not to different in this respect.
When I fitted my 14" ape hanger bars, the clutch cable was the one cable that I did not have to change. I simply re-routed it. Have a look at my link below and see if it gives you any idea for doing similar on your model. I had to spin the bent section of the far end of the cable to allow this but that takes seconds.

- LINK -
to 2 pics ape install thread with 2 relevant pictures to give you an idea.
Back to top Go down
Steen G

PostSubject: Re: VZ 800 Clutch Cable   Wed Jan 15, 2014 7:07 pm

Cool bike, looks great.

Rerouting is not an option. Problem is the new handlebar is wider and forwarded quite a bit. The cable goes under the toptree, through the frame and down behind the watercooler. That gives it a weird "bend" below the toptree because my cable got a 90 degree bend where it exits the grip which makes it point forward. A cable like Yours might solve my problem.

Customising is an art  Rolling Eyes
Back to top Go down
Sponsored content

PostSubject: Re: VZ 800 Clutch Cable   

Back to top Go down
VZ 800 Clutch Cable
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
» clutch cable???
» Extended clutch cable
» clutch cable
» Clutch Cable Broke - repair - pictures
» replacing clutch cable.

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: General Aftermarkets & Modifications-
Jump to:  
Slide Show
A random selection of member bikes.
Latest topics
» 4 degree advance
by OldManYam Sat Aug 19, 2017 7:32 pm

» Powder coat wheels
by hawktheslayer Sat Aug 19, 2017 6:49 pm

» Hello from Sweden
by simbo Thu Aug 17, 2017 9:12 pm

» fuel guage probs
by goshhub Thu Aug 17, 2017 7:02 pm

» Great Site!
by peardrop3 Thu Aug 17, 2017 11:42 am

» xhaust mod or not
by Bluesman Wed Aug 16, 2017 10:17 pm

» My 2004 VZ800 with batwing fairing
by Rob Reimer Wed Aug 16, 2017 8:21 pm

» Hi From Fife
by simbo Wed Aug 16, 2017 6:11 pm

» GMan Bushing
by superdane Tue Aug 15, 2017 7:52 pm

» * Not Lowers But Uppers, Gaining Ride Height *
by simbo Sun Aug 13, 2017 9:17 pm

» VZ800 (2006) single seat conversion
by Trodat Sat Aug 12, 2017 1:56 pm

» o2 elimination or not
by simbo Fri Aug 11, 2017 4:25 pm

» Pillion Backrest
by peardrop3 Tue Aug 08, 2017 3:37 pm

» want to swap the secundary gear transmission of vx 800 with VS 1400
by ardie Mon Aug 07, 2017 5:47 pm

» anybody ever thought to switch to belt-drive primary-drive?!
by Twojobmick Sun Aug 06, 2017 6:04 pm

» Rejetting Help
by SkidzHD Sat Aug 05, 2017 10:43 pm

» the ratio of the primary drive (transmission) of the Intruder 1400
by peardrop3 Thu Aug 03, 2017 2:28 pm

» the biggest rear tire / rim that fits on VX 800
by sayhello Tue Aug 01, 2017 8:46 pm

» Trunk box fitted to M50
by ardie Tue Aug 01, 2017 7:38 pm

» Is 120A battery enough for the M800?
by ardie Tue Aug 01, 2017 7:30 pm

Log in
Log in automatically: 
:: I forgot my password