Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
 
HomePublicationsRegisterLog in

Share | 
 

 FI Power Pro and K&N

Go down 
AuthorMessage
azcam
Valued Member
avatar


PostSubject: FI Power Pro and K&N   Sat Nov 08, 2014 1:17 am

Fitted the K&N replacement stock filter and the Cobra FI Pro today. Took about a couple of hours.  
Easy to install.  I recommend taking the tank of then taking the filter of as the Allen key bolts are a bugger to get to. As I found out as I forgot to fir the air box on before putting the tank back on.
Only went for a quick spin as it was wet n dark. Noticed a difference straight away.  Engine felt more relaxed as if the gears were longer. Sounds a bit smoother to me as well. Will have a proper blast on Sunday on the Ride of Respect
 Hope the bobbies don't get the hump with my exhaust being de baffled?
Back to top Go down
simbo
.. Mechanical Tart .. .. Site Moderator ..
avatar


PostSubject: Re: FI Power Pro and K&N   Sat Nov 08, 2014 8:05 am

Should be running sweet now Arron   Can't see the bobbies bothering about you're exhaust? there'll be loads with noisy exhausts.
Back to top Go down
Mr Intruder
Suzuki800.com Founder ... & ... Senior Administrator
avatar


PostSubject: Re: FI Power Pro and K&N   Sat Nov 08, 2014 8:14 am

Sounds like a good job done, that mod is one you will be so pleased you have done.
Never had a problem with the bobbies with my V&H Cruisers & they are pretty load.
Back to top Go down
DocSjulle
Hero Globs
avatar


PostSubject: Re: FI Power Pro and K&N   Sat Nov 08, 2014 10:01 am


The smoothness was also the first thing I noticed after fitting the PowerPro.
Back to top Go down
azcam
Valued Member
avatar


PostSubject: Re: FI Power Pro and K&N   Sat Nov 08, 2014 10:21 am

Big thanks to Graham kfc 1440 for a real bargain at £100.
Right whose got a 1400 drive for sale.
Back to top Go down
peardrop3
Very Valued VIP Member
avatar


PostSubject: Re: FI Power Pro and K&N   Sat Nov 08, 2014 2:11 pm

Try e-bay Arron but it will be mostly from the USA if you can pick one up as we've already had all the UK ones here muhahaha!!!!  hyst
Back to top Go down
Sponsored content




PostSubject: Re: FI Power Pro and K&N   

Back to top Go down
 
FI Power Pro and K&N
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: FueI Injection Modules, Fuel, Jetting & Modifications, etc-
Jump to:  
Slide Show
A random selection of suzuki800.com member bikes.
Latest topics
» Hello from Australia
by Bluesman Fri Jun 22, 2018 6:49 pm

» xhaust mod or not
by Bluesman Fri Jun 22, 2018 6:37 pm

» missfire
by harris156 Fri Jun 22, 2018 2:07 pm

» Hey guys! I'm beefy
by ardie Thu Jun 21, 2018 9:32 pm

» Newbie vl rider
by johnboss Wed Jun 20, 2018 11:41 pm

» Hi all
by johnboss Wed Jun 20, 2018 11:40 pm

» hello
by johnboss Wed Jun 20, 2018 11:40 pm

» Gear lever
by bigrearend Wed Jun 20, 2018 9:59 am

» Hi from Herts
by ardie Tue Jun 19, 2018 9:33 pm

» Took baffles out (highway hawk pipes)
by Goshawkmark123 Tue Jun 19, 2018 3:32 pm

» Hi everyone
by TexMad Tue Jun 19, 2018 9:01 am

» Newbie c800 Boss
by peardrop3 Sun Jun 17, 2018 1:20 pm

» Newbie
by peardrop3 Sun Jun 17, 2018 1:17 pm

» My monsta
by captain morgan Thu Jun 14, 2018 7:38 pm

» Hello from Cheshire.
by Goshawkmark123 Wed Jun 13, 2018 11:25 am

» my Suzuki Intruder VZ800M K6 2006 REG
by bigmal Tue Jun 12, 2018 6:59 pm

» Newbee
by Goshawkmark123 Tue Jun 12, 2018 2:49 pm

» From 15'' to 16''
by jan1 Tue Jun 12, 2018 1:08 pm

» Pair valve removal kit??
by Goshawkmark123 Tue Jun 12, 2018 10:19 am

» Exhaust gaskets for M800/VZ800 - V&H Twin Slash Staggered Exhausts ?
by captain morgan Mon Jun 11, 2018 7:09 pm

Log in
Username:
Password:
Log in automatically: 
:: I forgot my password