Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
HomePublicationsRegisterLog in

Share | 

 sissybar backrest

View previous topic View next topic Go down 
The Drifter

PostSubject: sissybar backrest   Tue Sep 15, 2015 8:50 pm

As anyone purchased a sissy bar and back rest from Hong Kong / china if so how did they find the quality and fitting any links appreciated
Back to top Go down
Very Valued VIP Member

PostSubject: Re: sissybar backrest   Tue Sep 15, 2015 8:58 pm

Hi drifter
I bought mine from the states but I think it was made in China.

I bought a combined sissy bar and rear rack, and found the spacing all over the shop (in terms of whether it was the right width for the fender rails.

I ended up buying packs of stainless steel washers to pack it out.... So turned out fine in the end but a bit of a hassle. Oh, and it goes rusty if the weather man forecasts rain!

But as others have said, the Chinese are getting their act together and so you could buy from there and get decent quality. Still a bit of a lottery I say....
Back to top Go down
The Drifter

PostSubject: Re: sissybar backrest   Tue Sep 15, 2015 9:03 pm

cheers Mal
Back to top Go down
captain crash
Mentally Deficient lunatic ..... & ..... Site Moderator

PostSubject: Re: sissybar backrest   Sun Sep 20, 2015 8:10 pm

I would stay well away from Chinese chrome, it just aint done properly. Electrical stuff yes but stuff thats been chromed no way, I bought some mirrors and the chrome was shit shit shit, bubbly spotty an thin as fook. It was a rusty in no timeĀ 
Back to top Go down

PostSubject: Re: sissybar backrest   Mon Sep 21, 2015 12:22 pm

I bought one with a rear rack ,fitted OK but I could tell the chrome wouldn't last ,I sprayed mine satin black along with my other chromework . it has proved to be strong enough though ..
Back to top Go down
Sponsored content

PostSubject: Re: sissybar backrest   

Back to top Go down
sissybar backrest
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
» K100 Backrest
» Custom passenger backrest
» Utopia Backrest Ordered!
» Convert your Buttrest to a Backrest
» Honda Silverwing butt rest to Backrest Conversion Kits Available

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: General Aftermarkets & Modifications-
Jump to:  
Slide Show
A random selection of member bikes.
Latest topics
» 4 degree advance
by simbo Today at 8:29 pm

» Hello from Sweden
by simbo Yesterday at 9:12 pm

» fuel guage probs
by goshhub Yesterday at 7:02 pm

» Great Site!
by peardrop3 Yesterday at 11:42 am

» xhaust mod or not
by Bluesman Wed Aug 16, 2017 10:17 pm

» My 2004 VZ800 with batwing fairing
by Rob Reimer Wed Aug 16, 2017 8:21 pm

» Hi From Fife
by simbo Wed Aug 16, 2017 6:11 pm

» GMan Bushing
by superdane Tue Aug 15, 2017 7:52 pm

» * Not Lowers But Uppers, Gaining Ride Height *
by simbo Sun Aug 13, 2017 9:17 pm

» VZ800 (2006) single seat conversion
by Trodat Sat Aug 12, 2017 1:56 pm

» o2 elimination or not
by simbo Fri Aug 11, 2017 4:25 pm

» Pillion Backrest
by peardrop3 Tue Aug 08, 2017 3:37 pm

» want to swap the secundary gear transmission of vx 800 with VS 1400
by ardie Mon Aug 07, 2017 5:47 pm

» anybody ever thought to switch to belt-drive primary-drive?!
by Twojobmick Sun Aug 06, 2017 6:04 pm

» Rejetting Help
by SkidzHD Sat Aug 05, 2017 10:43 pm

» the ratio of the primary drive (transmission) of the Intruder 1400
by peardrop3 Thu Aug 03, 2017 2:28 pm

» the biggest rear tire / rim that fits on VX 800
by sayhello Tue Aug 01, 2017 8:46 pm

» Trunk box fitted to M50
by ardie Tue Aug 01, 2017 7:38 pm

» Is 120A battery enough for the M800?
by ardie Tue Aug 01, 2017 7:30 pm

» Hello from sunny South Wales...
by bigmal Mon Jul 31, 2017 9:54 pm

Log in
Log in automatically: 
:: I forgot my password