Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
 
HomePublicationsRegisterLog in

Share | 
 

 Standard air box mod

View previous topic View next topic Go down 
AuthorMessage
diesel dave
Member
avatar


PostSubject: Standard air box mod   Tue Dec 15, 2015 8:08 pm

after looking at the air boxes on my marauder i noticed the inlet pickups are half blocked off..sooo....i opened these up with my trusty Stanley knife which then made it realy bad on top three quarter throttle,hesitating and no pull at all,i then changed the main jets to 130 rear and 120 front(i had these handy) which then made it virtually un ride-able.So i then put 110 in rear and 100 in front carb,altered the mixtures half turn out and now......this now goes like stink....the rear tries to dig in and the front end lightens under heavy acceleration.This is twice the bike it was now.I have to get this dynoed yet but im pritty sure this is a result,ayl post the dyno graphs when iv got it done
Back to top Go down
simbo
.. Mechanical Tart .. .. Site Moderator ..
avatar


PostSubject: Re: Standard air box mod   Tue Dec 15, 2015 8:23 pm

Sounds like it's breathing a little easier 
Back to top Go down
Mr Intruder
Suzuki800.com Founder ... & ... Senior Administrator
avatar


PostSubject: Re: Standard air box mod   Tue Dec 15, 2015 9:11 pm

Sounds like a great job done. 
Having her Dynoed will tell you exactly how she is going, although for a seasoned rider it'll only tell you a fraction more than "the seat of your pants" and it seems like "the seat of your pants" is telling you what's needed. 
Back to top Go down
captain crash
Mentally Deficient lunatic ..... & ..... Site Moderator
avatar


PostSubject: Re: Standard air box mod   Wed Dec 16, 2015 5:03 pm

Nice one dave, must be well happy with the results  msrke
Back to top Go down
Sponsored content




PostSubject: Re: Standard air box mod   

Back to top Go down
 
Standard air box mod
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» How to type German Umlaut codes on a standard keyboard
» Stubby Exhaust from standard RRW can
» 1972 Autostick Standard Beetle - ASBug
» Auto to Standard conversion.
» JCW backbox on standard MCS system

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: FueI Injection Modules, Fuel, Jetting & Modifications, etc-
Jump to:  
Slide Show
A random selection of suzuki800.com member bikes.
Latest topics
» Hi All, from Sunny Kent :)
by EvoChris Yesterday at 9:44 am

» Chiltern Hills UK
by bagtoracer68 Mon Jan 15, 2018 2:36 am

» Hey, Rick from York Pa
by bagtoracer68 Mon Jan 15, 2018 2:34 am

» Hello again everyone!
by bagtoracer68 Mon Jan 15, 2018 2:28 am

» C800 from Italy
by bagtoracer68 Mon Jan 15, 2018 2:27 am

» Hello
by bagtoracer68 Mon Jan 15, 2018 2:24 am

» Greetings from the South Coast
by bagtoracer68 Mon Jan 15, 2018 2:22 am

» Hello from North Herts
by bagtoracer68 Mon Jan 15, 2018 2:21 am

» Ola from down south....
by bagtoracer68 Mon Jan 15, 2018 2:19 am

» Hello
by bagtoracer68 Mon Jan 15, 2018 2:09 am

» Greeting to all !!
by bagtoracer68 Mon Jan 15, 2018 2:06 am

» Hello V*800 world
by bagtoracer68 Mon Jan 15, 2018 2:03 am

» greetings!
by bagtoracer68 Mon Jan 15, 2018 2:01 am

» New Here
by bagtoracer68 Mon Jan 15, 2018 1:58 am

» G'day from an oldie
by bagtoracer68 Mon Jan 15, 2018 1:55 am

» VX800 connector hose between airboxes
by sacruickshank Sun Jan 14, 2018 3:23 pm

» used parts
by simbo Fri Jan 12, 2018 7:34 pm

» Exhaust wrapping
by simbo Thu Jan 11, 2018 7:27 pm

» Is it normal for coolant to gush out of air bleeder?
by RAnst4038 Thu Jan 11, 2018 1:26 am

» advice please - MMM Swith ~ 97 Marauder
by hmac Wed Jan 03, 2018 3:04 pm

Log in
Username:
Password:
Log in automatically: 
:: I forgot my password