Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
 
HomePublicationsRegisterLog in

Share | 
 

 2005 m800 frame, will 2003 model work

View previous topic View next topic Go down 
AuthorMessage
Elmo2709
Member
avatar


PostSubject: 2005 m800 frame, will 2003 model work   Sat May 21, 2016 4:28 pm

hi all,

i recently bought a 2005 vz800 (my first ever bike). however it was slightly damaged , majority has bee sorted but the frame was a little dented and bent.  if i buy a vl800 frame from 2003 will all my parts move over ok or will they be a different shape?


thanks  steve
Back to top Go down
simbo
.. Mechanical Tart .. .. Site Moderator ..
avatar


PostSubject: Re: 2005 m800 frame, will 2003 model work   Sat May 21, 2016 8:22 pm

Tough call,  I'd say yes but I'd double and treble check first, different part numbers but not sure what the differences could be?
Back to top Go down
Elmo2709
Member
avatar


PostSubject: Re: 2005 m800 frame, will 2003 model work   Sat May 21, 2016 8:24 pm

Thank you
Back to top Go down
katsd
Very Valued VIP Member
avatar


PostSubject: Re: 2005 m800 frame, will 2003 model work   Sun May 22, 2016 1:59 am

This is the fiche for the VZ 800, this is the fiche for the VL 800.  The part numbers are very similar, but not identical - I'd say they look the same.  I'd be inclined to print both of them out & compare them side by side.  

If you're still looking for a mudguard, there's this one on ebay at the moment.  I have one off an '01 Volusia, but I'm not sure how that'd look
Back to top Go down
Sponsored content




PostSubject: Re: 2005 m800 frame, will 2003 model work   

Back to top Go down
 
2005 m800 frame, will 2003 model work
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» 2005 Specialized P3 Long Frame, Fork and Cranks
» falcon diagram
» silver wing oil change pics
» hijet speedo cable gold dust £73 QUID FROM DAIHATSU
» For Sale: Mitsubishi Dingo Mirage 2003 Model

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: General Aftermarkets & Modifications-
Jump to:  
Slide Show
A random selection of suzuki800.com member bikes.
Latest topics
» Hello from Sweden
by simbo Yesterday at 9:12 pm

» fuel guage probs
by goshhub Yesterday at 7:02 pm

» Great Site!
by peardrop3 Yesterday at 11:42 am

» xhaust mod or not
by Bluesman Wed Aug 16, 2017 10:17 pm

» My 2004 VZ800 with batwing fairing
by Rob Reimer Wed Aug 16, 2017 8:21 pm

» Hi From Fife
by simbo Wed Aug 16, 2017 6:11 pm

» GMan Bushing
by superdane Tue Aug 15, 2017 7:52 pm

» * Not Lowers But Uppers, Gaining Ride Height *
by simbo Sun Aug 13, 2017 9:17 pm

» VZ800 (2006) single seat conversion
by Trodat Sat Aug 12, 2017 1:56 pm

» o2 elimination or not
by simbo Fri Aug 11, 2017 4:25 pm

» Pillion Backrest
by peardrop3 Tue Aug 08, 2017 3:37 pm

» want to swap the secundary gear transmission of vx 800 with VS 1400
by ardie Mon Aug 07, 2017 5:47 pm

» anybody ever thought to switch to belt-drive primary-drive?!
by Twojobmick Sun Aug 06, 2017 6:04 pm

» Rejetting Help
by SkidzHD Sat Aug 05, 2017 10:43 pm

» the ratio of the primary drive (transmission) of the Intruder 1400
by peardrop3 Thu Aug 03, 2017 2:28 pm

» the biggest rear tire / rim that fits on VX 800
by sayhello Tue Aug 01, 2017 8:46 pm

» Trunk box fitted to M50
by ardie Tue Aug 01, 2017 7:38 pm

» Is 120A battery enough for the M800?
by ardie Tue Aug 01, 2017 7:30 pm

» Hello from sunny South Wales...
by bigmal Mon Jul 31, 2017 9:54 pm

» hack of the dj-drive mod: apply it on VX 800 with swing arm rework
by sayhello Mon Jul 31, 2017 8:30 pm

Log in
Username:
Password:
Log in automatically: 
:: I forgot my password