Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
 
HomePublicationsRegisterLog in

Share | 
 

 Fork mounted screens

Go down 
AuthorMessage
KeithW
Member
avatar


PostSubject: Fork mounted screens   Wed Jan 25, 2017 12:07 pm

I have now directed my thoughts to putting a screen on my new bike. The front runners in this business are National Cycle and Memphis Shades - both from USA and both quite expensive. However, they both mount their screens on the forks. On my Shadow the fork covers were bolted on to the yoke but the Intruders' are not. They are just mounted on the rubber bushes and can be turned by hand. Had a look in the manual and this is how it is suposed to be. Question is, it sounds a bit iffy to mount a screen on them. Has anyone else faced this issue?
I had a Skidmarx screen on the Shadow and they fit on the bars and the yoke, a 4 point fix. I have spoken to them and they are quite happy to make the screen whatever height I like so I will probably go with a 15" screen from them. They are always helpful on the phone.

KeithW
Back to top Go down
KeithW
Member
avatar


PostSubject: Re: Fork mounted screens   Sat Jan 28, 2017 6:21 pm

I have now ordered a Skidmarx screen with a grey tint and a height of 15". Not happy about using the fork covers to support the weight of air pressure on a screen. They are really helpful people and it is supporting British manufacturing, which makes me feel good about the decision.

KeithW
Back to top Go down
simbo
.. Mechanical Tart .. .. Site Moderator ..
avatar


PostSubject: Re: Fork mounted screens   Sat Jan 28, 2017 7:34 pm

KeithW wrote:
 Not happy about using the fork covers to support the weight of air pressure on a screen. 

KeithW

They should be fine, I've seen a few fork mounted screens on VL800's without problems. I had my lowers connected to the lower fork covers without problems and they'll rotate all the way round.
Back to top Go down
trspsantos
Prospect



PostSubject: Re: Fork mounted screens   Fri Mar 31, 2017 1:27 am

Hey guys!

I was browsing around and saw this bikes screen, does any body know where its from?

by the way (not the topic, I know) but where the hell can I order these bags?? They seem to out of stock in the UK and they don't ship to Portugal from the US.

Thanks!


Back to top Go down
peardrop3
Very Valued VIP Member
avatar


PostSubject: Re: Fork mounted screens   Sun Apr 02, 2017 5:45 pm

Sorry cannot help on either count.
Back to top Go down
Sponsored content




PostSubject: Re: Fork mounted screens   

Back to top Go down
 
Fork mounted screens
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: Screens, Lowers & Wind deflectors.-
Jump to:  
Slide Show
A random selection of suzuki800.com member bikes.
Latest topics
» hello all from Somerset
by peardrop3 Today at 5:32 pm

» Hello from Burlington Ontario, Canada
by peardrop3 Yesterday at 3:36 pm

» Installing coolant/water temperature gauge . . . . . . (Now Done)
by butcherman Tue May 22, 2018 10:14 pm

» my Suzuki Intruder VZ800M K6 2006 REG
by bagtoracer68 Tue May 22, 2018 2:26 am

» batty battery
by bagtoracer68 Tue May 22, 2018 2:13 am

» Hello from Toronto
by bagtoracer68 Tue May 22, 2018 2:11 am

» just wanted to say hello fellow riders
by bagtoracer68 Tue May 22, 2018 2:07 am

» New in Florida
by bagtoracer68 Tue May 22, 2018 2:06 am

» Greetings from Denmark
by bagtoracer68 Tue May 22, 2018 2:05 am

» Hello from Shelley Idaho
by bagtoracer68 Tue May 22, 2018 2:04 am

» Hello from Missouri, USA
by bagtoracer68 Tue May 22, 2018 2:03 am

» Time for a new one?
by bagtoracer68 Tue May 22, 2018 2:01 am

» Hi all
by bagtoracer68 Tue May 22, 2018 1:57 am

» hi everyone. im from kent uk.
by bagtoracer68 Tue May 22, 2018 1:55 am

» Fuel pump don’t come on when I turn the ignition key
by jester29 Thu May 17, 2018 10:20 pm

» 1998 VZ800 MondoDrive 14 Belt Conversion
by bigmal Wed May 16, 2018 9:36 pm

» Powder coat wheels
by captain morgan Mon May 14, 2018 10:28 pm

» Exhausts
by captain morgan Mon May 14, 2018 10:19 pm

» F1 light flashing.
by Gazza66 Fri May 11, 2018 7:33 pm

» Hello Everybody - New Member
by simbo Fri May 11, 2018 9:52 am

Log in
Username:
Password:
Log in automatically: 
:: I forgot my password