Lambda Sensor C800

Does anybody know where I can get a Lambda Sensor Boss to weld into Vance and Hine Cruzers exhausts? So I can fit the Sensor. Thanks

Don't you need to blank the sensor and have the engine re-mapped?

Pledge

pledge wrote:

Does anybody know where I can get a Lambda Sensor Boss to weld into Vance and Hine Cruzers exhausts? So I can fit the Sensor. Thanks

Try here Sold Here Link

Prince 'O' Darkness wrote:

Don't you need to blank the sensor and have the engine re-mapped?

Thats what I did!

But I have known others that have done it that way too whereby you bore and tap out holes in the new exhausts’ downpipes to allow for the O2 sensors, then plug them in. However, because the O2 sensors are still in operation, the FI processor won’t actually richen the mixture for the first 15-20% of throttle position, at least thats what I have been informed.

Thanks for the replies Guys I might have to have a rethink on what to do

What bike you got pledge, C800 M800, Model & year?

It's a 2007 C800

You really need to add a fuel injection processor!
Some people say that if you are only changing the air filter or the exhausts then bike will cope with the changes.
After a lot of reading I would disagree with that partly because the bike comes out of the factory already lean due to EU emission laws.
Apart from that if you are going to spend all that money on after market performance exhausts then why would anyone not let them do there job properly by running them lean & possibly risking engine damage.
This is a subject that lots of people have lots of different views on and mine is just one more in the pot.

I agree