
Suzuki 800 Intruder Club & Forum A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder |
| | Cheapest place to get OEM exhaust gaskets? | |
| | Author | Message |
---|
EazyDuz Member

 | Subject: Cheapest place to get OEM exhaust gaskets? Sat Jun 21, 2014 1:31 pm | |
| Want to pick up a set just for spare. Looked on American sites but the postage is often more than the value of them! A guy makes his own on Ebay but they are quite a bit thinner than OEM. What are they, about £11 each from a Suzuki dealer? Thanks | |
|  | | simbo * Site Guru *

 | Subject: Re: Cheapest place to get OEM exhaust gaskets? Sat Jun 21, 2014 2:57 pm | |
| I got mine from Wemoto, pretty cheap and quick delivery from what I can remember. | |
|  | | Two-Bears * VZ Guru *

 | Subject: Re: Cheapest place to get OEM exhaust gaskets? Sun Jun 22, 2014 2:23 am | |
| Hi Sim,, If you get a spare minuet can you measure the exhaust gaskets for me,, one of the lads who will be at my bike meet today told me he uses a guy who sells them by size,,,,Inside diameter, outside diameter and thickness,, I`ll check it out and post my findings,, ya never know it may be a goldmine.
Thanks
Hi Easydoes, have a look here mate.
http://www.ebay.co.uk/itm/MANIFOLD-GASKET-EXHAUST-GASKETS-SUZUKI-INTRUDER-VS600-VX750-VL800-VX800-VZ800-61-/221320828359?_trksid=p2054897.l4275 | |
|  | | simbo * Site Guru *

 | Subject: Re: Cheapest place to get OEM exhaust gaskets? Sun Jun 22, 2014 7:48 am | |
| Hi John, Measurements of the exhaust gaskets I've got are o/d 61mm, i/d 50mm, thickness 6mm.  | |
|  | | EazyDuz Member

 | Subject: Re: Cheapest place to get OEM exhaust gaskets? Sun Jun 22, 2014 8:23 am | |
| - Two-Bears wrote:
- Hi Sim,,
If you get a spare minuet can you measure the exhaust gaskets for me,, one of the lads who will be at my bike meet today told me he uses a guy who sells them by size,,,,Inside diameter, outside diameter and thickness,, I`ll check it out and post my findings,, ya never know it may be a goldmine.
Thanks
Hi Easydoes, have a look here mate.
http://www.ebay.co.uk/itm/MANIFOLD-GASKET-EXHAUST-GASKETS-SUZUKI-INTRUDER-VS600-VX750-VL800-VX800-VZ800-61-/221320828359?_trksid=p2054897.l4275
Hi, those are the ones I have on the bike currently. They were very hard to get a good seal on. The stock ones are quite a bit thicker hence in future I'd opt for OEM gaskets | |
|  | | Sponsored content
 | Subject: Re: Cheapest place to get OEM exhaust gaskets?  | |
| |
|  | | | Cheapest place to get OEM exhaust gaskets? | |
|
Similar topics |  |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |
Slide Show | A random selection of suzuki800.com member bikes. |
Latest topics | » Greetings
by tkennar Mon Mar 20, 2023 4:47 pm
» Greetings and salutations
by JimboJ Sun Mar 12, 2023 1:14 pm
» two into one exhaust
by beachartist Sun Mar 12, 2023 12:50 am
» New member
by Kev Sat Mar 11, 2023 9:02 am
» Another Sachs Roadster
by adilmon Fri Mar 10, 2023 2:08 pm
» New member
by Born to be mild Thu Mar 02, 2023 11:10 am
» Headlight fix
by flying1 Wed Mar 01, 2023 9:43 am
» REV Counter stops when lights are on???
by Damion Jones Sun Feb 26, 2023 8:00 pm
» Headlamp
by flying1 Sat Feb 25, 2023 10:08 pm
» Hi everyone newbie thanks for letting me join
by flying1 Sat Feb 25, 2023 4:52 pm
» VX800 - Wiring issue colours & diagram?
by Damion Jones Fri Feb 24, 2023 11:59 pm
» Vz800 crankshaft
by Big Rab Thu Feb 23, 2023 6:18 pm
» Final drive
by ardie Tue Feb 14, 2023 7:14 pm
» My 2002 VS800
by Badger Sun Feb 12, 2023 4:31 pm
» Engine timing
by Big Rab Mon Feb 06, 2023 5:25 pm
» New member
by Bobby Thu Feb 02, 2023 2:41 pm
» New member
by Ray Noble Wed Jan 18, 2023 11:19 am
» ciao
by gioniko73 Tue Jan 17, 2023 12:09 am
» Introduction
by james mclaughlin Sat Jan 14, 2023 4:01 pm
» vs750/800 handle bar switches wiring
by Badger Thu Jan 12, 2023 3:17 pm
|
|