gearing and transmission revisited : calculations on the dj-mod

hello dear suzuki experts

i run a VX 800 - and i  want to rework the transmision 
- i guess that you are the experts for this project.

impressed by the inspiring stories

1. dj-mod - explained
http://www.volusiariders.com/58-motors-transmissions-drives/180488-dj-drive-mod-explained.html

2. How to guide: VS1400 drive on a VL800/C50
http://www.volusiariders.com/58-motors-transmissions-drives/185987-how-guide-vs1400-drive-vl800-c50.html


note: i run a VX 800 - and i  want to rework the transmision   - i guess that you are the experts for this project.

for calculating the data - i want to create some gearing plots...

therefore i need to have the data
Reduction ratios:
Primary: Internal Gearing: Engine: Transmission
Final; External Gearing: Ratio of Front &/ Rear Sprocket
Overall ratio: (engine:tire)

- btw: i am planing to replace the stock shaft VX 800 with the final drive of VS 1400

i want to see the differences  in gearing plots....


like i did this for the GS 500



http://forum.gs-500.de/attachment.php?attachmentid=16328&d=1368031261



the main difference is : GS 500 is chain driven ; VX 800 is shaft-driven with a cardan...
therefore we need to enter the data in a special way...

Reduction ratios:
Primary: Internal Gearing: Engine: Transmission
Final; External Gearing: Ratio of Front &/ Rear Sprocket
Overall ratio: (engine:tire)

question : can you help me here in doing that:

i have the following data:

http://www.suzukicycles.org/VX-series/VX800_brochures.shtml
international version:

Secondary reduction ratio:     0.851 (23/27) - 1.133 (17/15x30/30)...
Final reduction ratio:     3.090 (34/11)
E-03, E-33:     1.096 (17/15 x 30/31)

Gear ratios:
Low 1.690 (71/42)
2nd 2.285 (32/14)
3rd 1.631 (31/19)
4th 1.227 (27/22)
Top 1.000 (25/25)



well - the first question is - are this true data - are they valid - for the stock version of VX 800?
the second question: which data are relevant - if i use the Final-drive VS 1400 .... ?

btw:i ve tried to attach the gearing spreadsheet of Roberto - but unfortunatly i cannot attach
- winrar files
- excel-files
- calc files

i can send you the script or you can get it from heere....

hello i have found some data

see the manual
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/Suzuki%20VX800%20Service%20Manual.pdf




foto hochladen


i think this helps us.... with this values we can step forwards

As this is a VL Intruder forum, you be better directing this question to a VX forum - they'll have a lot more experience than us (expect probably Andrew)

hello katsd many thanks - trying to do so,

thought that some of you could lend a helping hand...

again many thanks